2.3 operAtIon
Manual operation
The operating mechanism of the circuit breaker acts through springs, charged manually or
electrically. Manual charging of the springs is performed by pulling the charging rod down,
until the end, 7 or 8 times, until the charge indicator indicates CHARGED.
AttentIon!
If the circuit breaker is equiped with an undervoltage coil, it must be energized
before turning on the circuit breaker.
To turn on the circuit breaker, press the on button.
To turn off the circuit breaker, press the off button.
CIRCUIT
BREAKER ON
CIRCUIT
BREAKER OFF
English
open Circuit Breaker
SPRINGS
CHARGED
ABW | 29