open Circuit Breaker
Pull the charging lever downward and remove the lid of the circuit breaker.
Then, locate the point of installation of locking on the lip and break it open.
Remove the lock of the locking device. Insert it in the orifice of the lid, as indicated below
and reposition the lock to the inside.
Turn the key in a clockwise direction and reinstall the lid of the circuit breaker, pulling the
charging lever downward and passing it through the opening.
operation
To block the circuit breaker, maintain the off button pressed and turn the key in a
counterclockwise direction. In this position the key may be removed and the circuit breaker
remains blocked.
To unblock the circuit breaker, turn the key in a clockwise direction. In this position, the
key cannot be removed.
58 | ABW
English