Using The Product As Intended; Safety Notes; Contents; Technical Data For The Turnout Decoder - marklin 24802 Manual De Instrucciones

1. Using the Product as Intended

The track and turnouts can be used in Märklin's H0 C Track
system.

2. Safety Notes

Make sure you read the following safety notes before
using this Märklin product for the first time.
• IMPORTANT! Sharp edges and points required for opera-
tion. Danger of choking due to detachable small parts that
may be swallowed.
• This product may only be used indoors.
• Do not store this product in direct sunlight or areas with
extreme swings in temperature or high humidity.
2.1 Important Notes
• The operating instructions are a component part of the
product and must therefore be kept in a safe place as
well as included with the product, if the latter is given to
someone else.
• Please contact your authorized Märklin dealer for
repairs or contact:
U.S. only:
Märklin, Inc.
PO Box 510559
New Berlin, WI 53151-0559 Stuttgarter Str. 55 - 57
Phone: 262-522-7080
Fax: 262-522-7288
Email: info@marklin.com
GB only:
Gebr. Märklin & Cie. GmbH
Reparaturservice
73033 Göppingen
Germany
Tel: +49 7161 608 222
E-Mail: Service@maerklin.de

3. Contents

1 x 20611 Tournout left digitally controlled
1 x 20612 Tournout right digitally controlled
5 x 20172 Straight Track
3 x 20188 Straight Track
2 x 20224 Curved Track
1 x Track Plan brochure
1 x Operating instruction

4. Technical Data for the Turnout Decoder

The built-in turnout decoder is the same in function as
Märklin item number 74461.
• Load at lantern output
• Load at turnout output
• Voltage for the digital power circuit max. 20 volts eff.
• External voltage
• Electrical strength

5. Symbols and Their Meaning

indicates adherence to all basic safety and health
requirements.
Toy for use with a transformer

6. Setup and Connections

Unplug the switched mode power pack from the household
current in order to prevent damage during setup. Do not
plug the switched mode power pack in the wall outlet again
until you are finished with all of the work.
≤ 100 milliamps
max. 2 amps
max. 20 volts DC
max. 40 volts
7