Troubleshooting - Steren INV-300 Manual Del Usuario

TROUBLESHOOTING

Trouble
Buzz in audio systems while the
inverter is in use
TV interference while the inverter is in
No Output Voltage
Cable not connected
Protection mode
The output voltage is not correct
Using a digital or analog voltmeter
The input DC voltage is too low or too
high
Unable to manage the charge
The charge is too large or potency is
too large
The cabling is wrong or the connection
is not safe
The startup is more than 2 times the
average
SPECIFICATIONS
Input:
Output:
Frequency:
Product design and specifi cations are subject to change, Product design and specifi cations are subject to change,
without notice. without notice.
use
10-14V
100-120V ~ 60Hz
60Hz
ENGLISH-9
Solution
Try to buy a high quality AC in-line filter
Adjust the monitor and the antenna
Check all connections
See the configuration section
Use a RMS reading voltmeter
Adjust the voltage to the requires level
Use a lower charge
Use adequate cables
Try another application