Uline H-3636 Guia De Inicio Rapido página 2

Figure 2
Figure 3
Figure 4
PAGE 2 OF 9
ASSEMBLY CONTINUED
1/4 x 1/" Screw
Seat Cushion
Back Support
2. Align armrest with holes on bottom of seat cushion.
Use three 1/4 x 1/" screws to attach. Repeat on
opposite side. (See Figure 2)
NOTE: Use Allen wrench to tighten all screws.
3. Insert back support post into corresponding socket
of mechanism attached to the bottom of seat
cushion. (See Figure 3)
4. Slowly lower chair assembly onto the gas lift. Press
down on seat cushion to secure in place.
(See Figure 4)
0621 IH-3636