Product Description And Specifications - Bosch GWS 900-100 Professional Manual Original

OBJ_BUCH-2775-004.book Page 9 Monday, April 3, 2017 8:22 AM
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains
socket elsewhere.
Product Description and
Specifications
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
Intended Use
The machine is intended for cutting, roughing and brushing of
metal and stone materials without the use of water.
For cutting with bonded abrasives, a special cutting guard
(accessory) must be used.
When cutting in stone, provide for sufficient dust extraction.
With approved sanding tools, the machine can be used for
sanding with sanding discs.
Product Features
The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.
Technical Data
Angle Grinder
Article number
Rated power input
Output power
Rated speed
Speed control adjustment
Grinding disc diameter, max.
Thread of grinder spindle
Thread length (max.) of grinder
spindle
Speed preselection
Kickback stop
Restarting Protection
Reduced starting current
Weight according to EPTA-
Procedure 01:2014
– with vibration-damping
auxiliary handle
– with standard-auxiliary
handle
Protection class
The values given are valid for a nominal voltage [U] of 230 V. For different voltages and models for specific countries, these values can vary.
Bosch Power Tools
1 Spindle lock button
2 On/Off switch
3 Thumbwheel for speed preselection (GWS 900-100 S/
4 Auxiliary handle (insulated gripping surface)
5 Combination spanner for M 14 grinder spindle*
6 Combination spanner for M 10 grinder spindle*
7 Grinder spindle
8 Protection guard for grinding
9 Locking screw for protection guard
10 Mounting flange with O-ring
11 Grinding wheel*
12 Clamping nut
13 Quick-clamping nut
14 Carbide grinding head*
15 Protection guard for cutting*
16 Cutting disc*
17 Hand guard*
18 Rubber sanding plate*
19 Sanding sheet*
20 Round nut*
21 Cup brush*
22 Handle (insulated gripping surface)
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
GWS... 900-100 900-115
0 601 ... 396 0.. 396 0..
W 900 900
W 450 450
-1
min 11000 11000
-1
min –
mm 100 115
M 10 M 14
mm 22
–
–
–
–
kg 2.0 2.0
kg 1.9 1.9
/II
GWS 900-115 S/GWS 900-125 S)
900-125 900-100 S 900-115 S 900-125 S
396 0.. 396 1..
900 900
450 450
11000 11000
– – 2800
– 11000
125 100
M 14 M 10
22 22 22

– –
– – –

– –

– –
2.0 2.0
1.9 1.9
/II /II /II
English | 9
*
396 1.. 396 1..
900 900
450 450
11000 11000
2800 2800
– 11000 – 11000
115 125
M 14 M 14
22 22
 
– –
 
 
2.0 2.0
1.9 1.9
/II /II
1 609 92A 3T4 | (3.4.17)