En - English - Integra Miltex Manual De Instrucciones

Integra Miltex
®
CAUTION: Federal (USA) law restricts this device to sale by or on the order
of a licensed medical professional .
Description
Integra® Miltex® Beauty Pink Wax and Beauty White Wax are soft
impression waxes to record accurate impressions and bite registrations .
Beauty Pink Wax may also be used for fabrication of occlusal rims for
denture tooth set-up and try-in procedures .
Indications for Use
Integra Miltex Beauty Pink Wax and Beauty White Wax is indicated for use
to record the relationship of the upper & lower teeth in dentulous patients .
Beauty Pink Wax is also indicated for use in the fabrication of occlusal rims
for denture tooth set-up and try-in procedures .
Contraindications
• None Known
Warnings
• Do not reuse . Dental waxes are designed for single use only .
• Used waxes should be considered a biohazard, use a responsible
and safe method of disposal .
Precautions
• Read the Instructions for Use and keep them in a safe place .
• Use the product only in accordance with its intended use, see
Indications for Use.
• Dental waxes should be handled and operated by personnel
completely familiar with their use, assembly and disassembly .
• It is recommended to wear appropriate personal protection
equipment (PPE) as promulgated by OSHA & AORN when handling,
preparing and using dental waxes .
• Do not use a flame to soften the wax .
• Do not overheat or melt the wax . The wax's melting point is
approximately 140°F (60°C) .
• Store waxes in a cool or refrigerated location .
2
Dental Wax
®
Adverse Reactions
• None known
Instructions for Use
Occlusal Rim Fabrication
1 . Soften the wax sheet in hot water to ensure even heat distribution .
2 . For occlusal rim fabrication: Fold the sheet across the short end
and manipulate to create a horseshoe shape to attach to the
baseplate .
3 . Cool to room temperature .
4 . The rims are now ready for patient try-in for jaw relation and
denture tooth set-up .
Bite registration
1 . Soften the wax sheet in hot water to ensure even heat distribution .
2 . Fold the sheet across the short end to the desired width and shape
for the bite registration required .
3 . Place in the patient's mouth and close into occlusion .
4 . Allow wax to cool before removing from the patient's mouth .
Storage Conditions
Store in a cool, well-ventilated or refrigerated place . Do not store near
strong oxidizers .
EN – English