Environmental Instructions - Würth HNG 26 N Traducción Del Manual De Instrucciones De Servicio Original

Intended use
The tool is intended to be used for setting aluminium,
steel and stainless steel blind rivets using genuine
Würth system parts.
Any other use is considered an improper use.
The user is solely responsible for damage
resulting from improper use.
Start-up
Risk of crushing
Incorrect handling can lead to
crushing.
Wear safety gloves.
¾
Replacing mouthpiece
See figure II/ ,
■
Replacing chuck jaws
See figure III.
■
Adjusting handle (only on 0949 810)
See figure IV/
■
Setting blind rivet
See figure V/
■
Emptying shank collecting container
See figure V/ ,
■
Adjusting the stroke (Fig. V/
To determine the correct stroke, the engagement
■
length of the mouthpiece [1] can be adjusted.
We recommend test riveting to determine the
■
correct screw-in depth.
The mouthpiece [1] can be adjusted to the
■
requested dimension by opening and closing.
For this purpose open the lock nut [2].
Once the desired result is achieved, the mouth-
■
piece [1] can be fixed using the lock nut [2].
CAUTION!
.
-
.
- .
- .
)
Maintenance / care
Note
Technical information to help the user.
When this information is ignored,
damage to property may result!
Clean the tool holder and lightly oil it from time to
time.

Environmental instructions

Do not throw the device away with
normal domestic waste. Dispose of
the device via an approved waste
disposal company or via your local
authority waste disposal facility.
Observe the currently valid regula-
tions. In case of doubt, contact your
waste disposal facility. Dispose of all packaging in
an environmentally compatible manner.
Warranty
We provide a warranty for this Würth device from
the date of purchase and in accordance with the
legal/country-specific regulations (proof of purchase
through invoice or delivery note).
Damage that has occurred will be corrected either
by replacement or by repair. Damage caused by
improper handling is not covered by the warranty.
Claims under warranty can only be accepted if
the device is returned fully assembled to a Würth
agency, your Würth sales representative or an
authorised Würth customer service workshop.
Subject to technical changes without prior notice.
We accept no liability for printing errors.
9