Tripp-Lite WEBCARDLX Manual Del Propietário página 5

Installation
2 - Dynamic IP Address Assignment
2-1
Connect WEBCARDLX to Network: Connect a standard Ethernet patch cable to
your network using the RJ45 Ethernet port on your WEBCARDLX.
Note: This port does not support PoE (Power over Ethernet) applications.
The card will attempt to obtain an IP address via DHCP . This may take as
long as several minutes, depending on your network environment.
2-2
Determine IP Address: To identify the IP address assigned to the WEBCARDLX,
contact your network administrator, and provide the MAC address of the
WEBCARDLX. You can also determine the IP address locally at the card.
Windows
®
the Micro-USB port on the WEBCARDLX using the included cable.
Windows 7: Windows will detect new hardware and install the in-build USB-to-
serial driver.
Windows 8: Windows will detect new hardware, but may not install a suitable
driver. If this happens, right-click the device in Device Manager, and click Update
Driver Software. Select Search Automatically. It may take some time, but
Windows will identify and install a compatible USB-to-serial driver from the internet.
Windows 10: Windows will detect new hardware and install a USB-to-serial
driver from Microsoft.
Once the driver is installed and the COM port has been assigned, start a
terminal emulation program, such as Tera Term Pro. Configure it to use the
assigned COM port and use the following serial port settings: 115.2Kbps, 8,
NONE, 1. Connect the USB cable to the PC and the Micro-USB end to the
Micro-USB port on the WEBCARDLX. When the login prompt appears, log in with
administrator username/password localadmin/localadmin. When the Menu
appears, navigate to "3- Network Configuration", then to "1- IP Configuration".
The assigned IP address will be displayed. After you have determined the IP
address, proceed to 4 - Test and Configure.
Note: You may wish to request a long-term lease period for the IP address, depending on
your application.
Note: PowerAlert
card is set up by default to receive a DHCP address for IPv4, IPv6 or both. Receiving both
addresses allows connection to the card via either the IPv4 or IPv6 address.
18-09-509-9335A5.indb 5
7, 8, 10: Be sure to apply all Windows updates. Connect your PC to
®
Device Manager and the WEBCARDLX support both IPv4 and IPv6. The
5
10/17/2018 1:41:46 PM