Beper P101CUD500 Manual De Instrucciones página 8

4 in 1 Multifunction grill Use instructions
Description of the product Fig. A
1. Lid
2. Small ribbed plates
3. Red operating light
4. Green operating light
5. Large smooth plate
6. Small smooth plate
7. Ribbed plate
Before first use
Remove the appliance and accessories from the box. Remove stickers and any protective films.
Place the device on a flat and stable surface, ensure a free space around the device of at least 10 cm. This
device is not suitable for installation in a cabinet or for outside use.
When the device is turned on for the first time, it will emit a slight bad smell. This is normal, it is recommended to
ensure adequate ventilation. The smell is only temporary and will disappear soon.
Use
Plug the power cord into a power outlet, the red operating light will turn on. With the appliance closed, let it heat
up without content, when the green operating light turns on, you can start cooking.
Lightly sprinkle the non-stick coating of the grill plates with oil or butter.
Attention: during use, the plates and the structure become very hot, avoid any contact, as this can
cause serious injuries.
After cooking, remove the food using wooden or plastic utensils. It is recommended not to use metal tools be-
cause they could damage the surface of the plates.
Cleaning and maintenance
Remove the plug from the socket and let the appliance cool down, keep the two halves open.
Clean the plates with a damp cloth or a soft brush.
Clean the outside with a damp cloth. Do not use aggressive and abrasive cleaners, metal sponge as they da-
mage the appliance.
Do not immerse the appliance in water or other liquid. The appliance is not dishwasher safe.
Technical data
Power: 1000W
Power supply: 220-240V ~ 50-60Hz
For any improvement reason, Beper will reserve the right to modify or improve this appliance without
notice.
8