BDS 8462 Guia Del Usuario página 4

APPLICATION
1.
Place the drill guide over the broken bolt.
2.
Drill the bolt as shown in picture.
Make sure that the drilling depth matches the bolt diameter.
Example: 8 mm drilling depth for an M8 bolt.
3.
Drive the loosening pin into the hole with a hammer.
4.
Place the drive nut over the loosening pin and avoid contact the
broken bolt.
5.
Turn the drive nut into loosening direction and remove the broken
bolt.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed