Product Overview - Hach sc1000 Manual Básico Del Usuario

This symbol indicates that a risk of electrical shock and/or
electrocution exists.
This symbol indicated the presence of devices sensitive to
Electrostatic Discharge (ESD) and indicated that care must be taken
to prevent damage with the equipment.
Electrical equipment marked with this symbol may not be disposed of
in European public disposal systems after 12 August of 2005. In
conformity with European local and national regulations (EU Directive
2002/96/EC), European electrical equipment users must now return
old or end-of life equipment to the Producer for disposal at no charge
to the user.
Note: For return for recycling, please contact the equipment
producer or supplier for instructions on how to return end-of-
life equipment, producer-supplied electrical accessories, and
all auxiliary items for proper disposal.

Product overview

The sc controllers are the platform for all intelligent probes and
analyzers. The sc platform is a full digital communication system based
on the open Modbus standard. When a Profibus interface card is
installed, the sc controllers give the full range of standardized method
values and parameters.
The sc controllers are PNO/PTO certified Profibus DP/V1 devices.
These devices are compatible with master class 1 (PLC SCADA) and
master class 2 systems, e.g., engineering stations.
An overview of the system is shown in
a factory or user installed item.
English 1
Figure 1. Profibus is available as
Figure 1 System overview
1 sc controller (Slave)
2 Programmable logic controller
(Master class 1)
Installation
C A U T I O N
Personal injury hazard. Only qualified personnel should conduct the tasks
described in this section of the manual.
Install the module to the controller
D A N G E R
Explosion Hazard. For the module installation in classified hazardous locations,
refer to the controller user manual for safety instructions.
3 PC with software (Master class 2
e.g. PC include with CP5611
card)