Technical Data; Before Use - Hilti AG 125-A36 Manual Del Usuario

4 Technical data

4.1 Angle grinder
Rated voltage
Rated speed
Maximum disc diameter
Weight in accordance with EPTA proce-
dure 01/2003
Drive spindle thread (arbor size)
Spindle length
4.2 Noise information and vibration values determined in accordance with EN 60745
The sound pressure and vibration values given in these instructions have been measured in accordance with
a standardized test and may be used to compare one electric tool with another. They may be used for a
preliminary assessment of exposure.
The data given represents the main applications of the power tool. However, if the power tool is used for
different applications, with different accessory tools or is poorly maintained, the data may vary. This may
significantly increase exposure over the total working period.
An accurate estimation of exposure should also take into account the times when the power tool is switched
off, or when it is running but not actually being used for a job. This may significantly reduce exposure over
the total working period.
Identify additional safety measures to protect the operator from the effects of noise and/or vibration, for
example: maintaining the power tool and accessory tools, keeping the hands warm, organization of work
patterns.
Noise emission values determined in accordance with EN 60745
Emission sound pressure level (L
Uncertainty for the sound pressure level
(K )
pA
Sound (power) level (L
Uncertainty for the sound power level
(K )
WA
Total vibration (vector sum of three directions), measured in accordance with EN 60745
Other applications, such as cutting, may produce vibration values that deviate from the given values.
Surface grinding with the
vibration-absorbing side handle (a
Uncertainty (K)

5 Before use

5.1 Inserting the battery
CAUTION
Risk of injury. Due to the angle grinder starting unintentionally.
▶ Before fitting the battery, check that the angle grinder is switched off and that the safety lock is
activated.
CAUTION
Electrical hazard. Dirty contacts may cause a short circuit.
▶ Before inserting the battery, check to ensure that the battery terminals and the contacts in the
angle grinder are free from foreign objects.
Printed: 15.12.2016 | Doc-Nr: PUB / 5246577 / 000 / 02
AG 125­A36
36 V
9,500 /min
125 mm
3.5 kg
M14
22 mm
) 80 dB(A)
pA
3 dB(A)
) 91 dB(A)
WA
3 dB(A)
AG 125­A36
3.2 m/s²
)
h,AG
1.5 m/s²
5
AG 150­A36
36 V
8,500 /min
150 mm
3.5 kg
M14
22 mm
AG 150­A36
4.6 m/s²
1.5 m/s²
English 23