Names Of Parts (Figure ➃); Cleaning And Sterilising; Recommended Cleaning Times; Cleaning (Figure ➀ In Reverse Order) - NUK e-MOTION Manual Del Usuario

eMotion 1.0 0910 Cluster 1 Seite 20 Montag, 6. September 2010 6:31 18
age as there is a danger that small parts
may become detached and swallowed.
• Do not leave teats in cold sterilising solu-
tion beyond the period specified by the
manufacturer, as this may cause damage to
the material.
1 Valve
2 Breast shield
3 Connection ring
4 Lip valve (+ 1 Replacement lip valve)
5 Breast milk container
6 Stand for breast milk container
7 Sealing disc
8 Protective cap
9 Screw ring
10 Teat
Hygiene is of priority when handling
breast milk and all parts that come
into contact with it. The pump should
therefore only be used in a clean and
sterile condition.

5.1 Recommended cleaning times

After each use:
• All except for the motor unit
accessories
12 and adapter 18 must be thoroughly
cleaned with water and sterilised
immediately after each use.
➀
5.2 Cleaning
(Figure
Unplug the mains adapter
Caution!
wall socket before cleaning.
Clean the lip valve
Caution!
and pointed bristles as well as sharp objects may
damage the valve.
1. Unscrew the motor unit
the connection ring 3 from the bottle
•
•
4. Names of Parts
11 Power supply plug
12 Motor unit
13 Warning light when the voltage is too low
14 On/off button
15 Battery compartment catch lock
16 Battery compartment lid
17 Suction power regulator
18 Mains adapter
19 Interchangeable plug attachments

5. Cleaning and Sterilising

2. Remove the lip valve
3. Unscrew the connection ring
4. Pull the motor unit
5. Remove the valve
6. All accessories
in reverse order)
from the
18
7. Wipe the motor unit
carefully. Hard
4
together with
12
5 .
20
For hygiene and safety reasons, teats should
be replaced every 1-2 months.
Use teats only with NUK FIRST CHOICE
Bottles. The NUK Vented Teat and NUK
Breast Milk Container
EN 14350.
➃
(Figure )
(batteries need changing)
from the lower part
4
of the breast shield.
motor unit .
12
12
shield 2 .
from the breast shield
1
- (not the motor unit
1 10
12 , the parts 11 , 18 and
cleaned and rinsed under running water as
milk residues may result in the build up of
bacteria and may damage the material. If nec-
essary use mild detergent.
with a damp cloth.
12
immerse the motor unit or
Caution: Never
adapter in water as this could damage the
electrics.
comply with
3 from the
off the breast
.
2
19 ) should be