Cooper Lighting IB500018EN Instrucciones De Instalación página 4

Installation Instructions – Prevail XL / USSL XL
House Side Shield
Tools required
#2 Phillips head screw driver and pliers.
1. Carefully remove plastic push pins on optics as shown
in (Figure 9).
N ote: The optics are permanently secured to the fixture.
DO NOT try to remove the optics. The optics are not
field-rotatable.
2. Install house side shield with provided #10 x 1/2"
Phillips screws. Tighten until house side shield is snug.
Do not over tighten.
3. For factory installed rotated optics, reuse the existing
#8-32 Phillips screw for attaching the house side shield.
N ote: House side shield must ONLY be installed on the
back side of the optics as shown in (Figure 10). DO
NOT install on the other side of the optic.
Wire Leads
Wire Grommet
Open Fixture Door
Figure 8.
4
COOPER LIGHTING SOLUTIONS
Neutral
Hot
Ground
IB500018EN Installation instructions
Figure 9.
House Side
Shield
Figure 10.
Plastic Pins
Screws #10 X 1/2" Or
#8 X 1/2" (As Required)