Glacier bay HD67673-0001 Guía De Uso Y Mantenimiento página 5

Installation (continued)
3
Securing the faucet assembly
NOTE: This step is for no escutcheon installation (optional).
If the escutcheon will be used, install the faucet assembly
as described in step 4.
□
Slide the washer (J) over threaded rod (I). Use
the lock nut (K) to secure the washer (J).
□
Attach the connector (H) by screwing it onto
the threaded end of the tube (1).
I
A
1
J
K
H
4
Preparing for installation
NOTE: This step is for escutcheon installation (optional).
If the escutcheon will not be used, install the faucet
assembly as described in step 1.
□
Shut off the water supply. Remove the old
faucet.
□
Clean the mounting surface.
□
Unscrew the nut (K), bolt (I) and quick connector (G).
□
Ensure that the gasket (L) is placed on the
bottom of the new faucet (A).
□
Retract the hose (1) up through the faucet body
until the hose tting is ush with the bottom of
shank (2). Do not pull the hose tting past the
shank.
□
Secure the escutcheon (B) and gasket (C) to the
faucet (A) with the screws (D).
□
Reattach the quick connector (G) by screwing it onto
the threaded end of the hose (1) in a clockwise
motion. Hand tighten only.
5
Please contact 1-855-HD-GLACIER for further assistance.
2
L
1
B
C
D
G
I
K
HOMEDEPOT.COM