BMW E46/4 Manual Del Usuario página 15

H
Push the three hexagonal screws supplied with the blind into the groove in the sun blind's cassette and guide
them through the holes you have just drilled. Fit the sun blind as shown in detail (A) with the lip of the casing
pointing towards the front of the car.
Electric sun blind only
Thread the cables for the sun blind through the hole provided for them.
Further instructions for fitting the electric sun blind are given in section 3.
For electric and manual sun blinds
Align the sun blind to the centre of the rear window shelf and secure it to the rear window shelf using
the washers and hexagonal nuts.
I
Manual sun blind only
Fit the rear window shelf back into the car and secure it using new clips. Insert and align the C pillar trim (10)
in the car. Push the top holder (11) for the sun blind on to the C pillar trim (10) as shown in the drawing and
push the rear mounting (12) behind the headlining (13). Push the C pillar trim (10) firmly into place.
The illustration shows one of the top holders for the left-hand side of the car, the procedure for the right-hand
side is identical.
The holders are marked R and L on their insides.
2-4/EN