ZALMAN ZM-SHE350 Manual De Usuario página 8

④Connect ZM-SHE350and your Desktop or Laptop with the official USB3.0 cable
in the package. It's also compatible with USB2.0, but in that case, the data transfer
speed is dramatically slowed down and it may not supply enough power. The
insufficient power supply can cause malfunction to ZM-SHE350.
■ The first -Password Setting
and Password Input
Caution:
ZM-SHE350 works only as security mode. In case of installing a used
HDD which got previous data, the HDD installed in PE should be
initialized. So, certainly make the data back-up in the HDD before using.
①When ZM-SHE350 is connected with PC via USB port, LED next to "1_USB
connected" turns on.
②In case of installing new HDD in ZM-SHE350, LED next to "2_Input new
password, and then press 'Enter' button" turns on.
③Enter your own Password (1~8 digit PIN setting) and press 'Enter' button.
④After entering new password in the above ③, LED next to "3_input password
and then press 'Enter' button" turns on. It's the process to identify your password.
Just enter the same password you entered in the previous step and press 'Enter'
button to apply it. (If you enter wrong or different password, you can't go to the next.
You have to go back to ②.
⑤In case of installing HDD which already got password input, LED next to "3_input
password and then press 'Enter' button" turns on. Just enter the correct password
and press <Enter> button to confirm.
8
WWW.ZALMAN.COM