DrBrowns Insta-Feed AC185-INTL Instrucciones De Uso página 7

STERILIZING SMALL PARTS
Always unplug the warmer before filling.
1. Add 2 oz / 60 ml of DISTILLED water directly into the Warming Chamber. Do not
overfill, as overfilling may cause damage to the unit.
2. Place small parts (nipples/teats, pacifiers/soothers, etc.) to be sterilized in the
Lift-Out Basket.
3. Place the Lift-Out Basket with small parts into the Warming Chamber.
4. Place the Adapter Ring on top of the Warming Chamber.
5. Place the Sterilizing Lid on top of the Adapter Ring.
6. Plug in the power cord and press the ON Button. The Indicator Light will turn on,
indicating the sterilizing cycle has begun.
7. When the Indicator Light turns off, the sterilizing cycle is done.
8. Allow the unit to cool for at least 10 minutes before removing the Sterilizing Lid,
Adapter Ring, and Lift-Out Basket.
NOTE: Be sure to observe the 10-minute cooling time as warmer parts and
sterilized parts will be hot. Always remove the Sterilizing Lid carefully by the
handle. Take care when removing the Sterilizing Lid as there may be some
residual steam—keep hands and face away. Allow the steam to clear before
reaching into the unit. Always retrieve the sterilized parts by removing the
Lift-Out Basket.
1
4
7
2
5
8
10
3
6
6