Festo CPX-CEC-C1 Manual De Instrucciones página 24

3.6 Power supply of the CPX−CEC−C1
The CPX−CEC−C1 is supplied with power via the interlinking
block.
The CPX−CEC−C1 is supplied via the operating voltage
for the electronics and sensors.
The load voltage supply for the valves and digital out
puts is not required.
The CPX−CEC−C1 can therefore be combined with all inter
linking blocks.
Interlinking block without supply.
Interlinking block with system supply.
Interlinking block with additional power supply if the
module to the right of the CPX−CEC−C1 requires an
additional supply, but the space is not sufficient for the
additional supply.
Note
Additional information on the power supply and the
interlinking blocks can be found in the CPX system de
scription P.BE−CPX−SYS−...
24 Festo P.BE−K−CPX−CEC 0907NH English