GE Zoneline AZ95E Manual Del Propietario Y Instrucciones De Instalación página 13

Installation Overview
UTILITY CLOSET CONNECTION LOCATIONS
IMPORTANT:
cable carefully to avoid interference. Hard-to-reach locations will make
installation and service difficult!
Use rigid duct for
90⁰ bends and tees
A
F
Primary Drain
49-5000561 Rev. 1
Plan and locate plenum, drains and thermostat
Flex duct may be used
for transitions only
Conduit
for direct
connection
B
D
C
E
Secondary
Drain
Reference Dimensions
A. Thermostat cable
Outside
B. Electrical connections -
Wall
Direct connections using conduit
C. Case width: 23
D. Case depth: 24
E. Case height: 30"
F. Condensate drains:
• Primary Drain – The centerline is
approximately 11
and 11
• Secondary Drain – The centerline is
6 ⁄
1
Electrical
6 ⁄
3
Disconnect
Clearance Requirements:
• Front Installation–
– 3" minimum clearance from front of case
and 3" minimum from two sides.
• Side Installation–
– 5" minimum clearance from front of
case, 3" minimum from access side and 3"
minimum from non-access side.
connector
⁄ " from left case wall
3
4
⁄ " from back case wall.
3
4
" from centerline of drain platform and
8
" from back case wall.
16
13