Measurements; Current Measurement; Range Of 3000 A - Sonel CMP-3000 Manual De Uso

The content of this chapter should be thoroughly read and un-
derstood since it describes methods of measurements and basic
principles of interpreting measurement results.

5.1 Current measurement

WARNING:
Disconnect the test leads before measuring current us-
ing clamp.

5.1.1 Range of 3000 A

To perform the current measurement:
 set the rotary switch at
 connect flexible clamp to COM and VΩ
sockets,
 fasten the clamp around the tested conduit. Only one conduit
must be within the testing range of the clamp,
 read the measurement result on the display.

5 Measurements

3000A
CMP-3000 – USER MANUAL
,
Hz%CAPTemp
51