Device Elements; Start Up; Anti-Static System; Dry Vacuum Cleaning - Würth 0701 138 Serie Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 35

Device elements

1 Electrodes
2 Suction hose
3 Air outlet, working air
4 Suction head lock
5 Air inlet, motor cooling air
6 Suction head
7 Dirt receptacle
8 Steering roller bow
9 Steering roller
10 Suction support
11 Floor nozzle
12 Suction tube
13 Cable hook
14 Filter cover
15 Carrying handle
16 Push handle
17 Bender
18 Rotary switch for suction output (min-max)
19 Automatic remote start
20 Socket
21 Automatic filter dedusting
22 Main switch
23 Flat fold filter
24 Filter dedusting
25 Floor nozzle holder
26 Drain hose
27 Holder for suction pipes
28 Holder for crevice nozzle
29 Power cord
30 Nameplate

Start up

ATTENTION
The flat pleated filter must always be in
place while vacuuming.

Anti-static system

Static charge is deflected by providing earthing to
the connection nozzles. This prevents the formation
of sparks and current shocks due to attachments
(option) with electrical conductivity.

Dry vacuum cleaning

To vacuum up fine dust, a fleece filter bag or a
membrane filter (special accessory) can addi-
tionally be used.
Install fleece filter bag
Illustration
 Release and remove the suction head.
 Install a fleece filter bag or a membrane filter
(option).
 Insert and lock the suction head.
Changeover from wet to dry vacuum
cleaning
ISS 35-S automatic only:
ATTENTION
Please note the following when switch-
ing from wet to dry vacuum cleaning:
If you vacuum dry dust while the filter el-
ement is still wet the filter will become
obstructed and may be damaged be-
yond repair.
 Dry the wet filter properly before use or re-
place it with a dry one.
 Change the filter, if required, according to in-
structions under the section "Maintenance and
Care".
Note: A PES flat fold filter must be used for wet
vacuum cleaning, order no. 0702 400 191.

Wet vacuum cleaning

Inserting the rubber lips
ISS 55-S automatic only:
Illustration
 Remove the brush strips.
 Install the rubber lips.
Note: The structured side of the rubber lips must
point outwards.
Remove the fleece filter bag
If the appliance is used to vacuum up wet dirt,
the fleece filter bag or the membrane filter
(special accessory) must always be removed.
It is recommended to use a special filter bag
(wet).
GB - 2
15

Publicidad

Tabla de contenido
loading

Tabla de contenido