Assembly; Before You Clean - Bissell PROHEAT PET TURBO 1799V Manual Del Usuario

Assembly

The only tool you will need to assemble your deep cleaner is a Phillips-head screwdriver.
1.
First, slide the Upper Handle
onto the base.
4.
Place Hex Nut into back of
Hose & Tool Holder and hold
in place. Insert bolt from the
front to the back, turning the
bolt into the Hex Nut until
snug. Do not overtighten.
Repeat for the second bolt and
Hex Nut.

Before You Clean

Maximum Results with your ProHeat® Pet Deep Cleaner
• Move furniture to another area if cleaning an entire room (optional).
• Thoroughly vacuum area with a dry vacuum cleaner before deep cleaning.
• Plan your cleaning route to leave an exit path. It is best to begin cleaning in the corner farthest
from your exit.
• Pretreating your carpet is recommended to improve cleaning effectiveness for spots and stains
and heavily soiled carpets.
1. Spray a BISSELL® Stain Pretreat formula onto high-traffic areas, soiled areas or stains.
2. Allow to penetrate for at least 3 minutes.
3. Deep clean carpet with machine set to Heavy Traffic cleaning mode..
• Opening windows or running a fan increases air flow in a room and expedites dry time.
WARNING
4 BISSELL.com
2.
From the flat side of the
Hose & Tool Holder, feed
the power cord through the
rounded-rectangle opening.
5.
Insert 2 screws into lower
2 holes located just above
the lower hose rack. Turn the
screws until tightened.
Do not plug in your machine until you are familiar with all instructions and operating procedures.
3.
Align the Hose & Tool
Holder with the Upper Handle
holes.
6.
Attach tools to the end
of the hose and front of the
Upper Handle. Wrap the power
cord and hose.