Krups BeerTender 0828213 Manual Del Usuario página 22

There is no keg
inside the
BeerTender
appliance (the
4 levels of the
volume indicator
are blinking).
The BeerTender
appliance tap
handle is not
correctly
installed/positioned.
The The BeerTender
BeerTender Keg has not
produces too reached the right
much foam dispensing
when temperature.
dispensing beer
(see also
chapter 7:
Dispensing
beer).
The BeerTender
Keg has been
shaken.
The tap handle is
being moved too
slowly.
Beer flows out The tap handle is
too slowly. not open all the
way.
The The BeerTender
BeerTender Keg has not been
appliance is chilled for long
dispensing enough in the
.
refrigerator and is
warm beer
thus not at the
right serving
temperature.
21
Install a keg inside
the BeerTender
appliance.
Install/position the
tap correctly.
Allow the
BeerTender Keg to
cool to the right
temperature. You
can rely on the
temperature
indicator on the
control display of
your BeerTender
appliance.
Wait 4 hours before
dispensing beer.
Firmly and quickly
pull the handle
down and forward
as far as it will go.
Open the tap
completely.
Allow the
BeerTender Keg to
cool in the
refrigerator for
about -12 hours.