ASROCK Fatal1ty Z97 Professional Serie Manual De Instrucciones página 24

Power LED Header
(3-pin PLED1)
(see p.1, No. 30)
Serial ATA3 Connectors
(SATA3_0:
see p.1, No. 13)
(SATA3_1:
see p.1, No. 15)
(SATA3_2:
see p.1, No. 17)
(SATA3_3:
see p.1, No. 14)
(SATA3_4:
see p.1, No. 16)
(SATA3_5:
see p.1, No. 18)
(SATA3_A1:
see p.1, No. 11)
(SATA3_A2:
see p.1, No. 12)
Serial ATA Express
Connectors
(SATAE_0:
see p.1, No. 19)
(SATAE_1:
see p.1, No. 20)
22
Please connect the chassis
1
power LED to this header
PLED-
PLED+
PLED+ to indicate the system's
power status.
These eight SATA3
connectors support SATA
data cables for internal
storage devices with up
to 6.0 Gb/s data transfer
rate. If the eSATA port
on the rear I/O has been
connected, the internal
SATA3_A2 will not
function. The SATA3_1
and SATA3_2 are shared
with the SATA Express
connector (SATAE_0).
The SATA3_4, SATA3_5
are shared with the
SATA Express connector
(SATAE_1).
To minimize the boot
time, use Intel® Z97 SATA
ports (SATA3_0) for your
bootable devices.
Please connect either
SATA or PCIe storage
devices to this connector.
The lower SATA
Express connector (the
combination of SATAE_1,
SATA3_5, and SATA3_4)
is shared with the M.2_
SSD (NGFF) Socket 3.