ASROCK Fatal1ty X79 Professional Serie Manual De Instrucciones página 31

2.6.1.3 Installing Four CrossFireX
Step 1. Install the identical 4-Way CrossFireX
®
AMD certified because different types of graphics cards will not work
together properly. (Even the GPU chips version shall be the same.) Insert
one graphics card into PCIE1 slot, another graphics card into PCIE2 slot,
the third graphics card into PCIE4 slot and the last graphics card into
PCIE5 slot. Make sure that the cards are properly seated on the slots.
Step 2. Use one CrossFire
and PCIE2 slots, another CrossFire
cards on PCIE2 and PCIE4 slots, and use the third CrossFire
connect Radeon graphics cards on PCIE4 and PCIE5 slots. (CrossFire
Bridge is provided with the graphics card you purchase, not bundled with
this motherboard. Please refer to your graphics card vendor for details.)
CrossFire
Step 3. Connect the DVI monitor cable to the DVI connector on the Radeon graph-
ics card on PCIE1 slot. (You may use the DVI to D-Sub adapter to convert
the DVI connector to D-Sub interface, and then connect the D-Sub monitor
cable to the DVI to D-Sub adapter.)
Fatal1ty X79 Professional Series Motherboard
TM
-Ready Graphics Cards
TM
Bridge to connect Radeon graphics cards on PCIE1
TM
Bridge to connect Radeon graphics
TM
Bridge
TM
-ready graphics cards that are
TM
Bridge to
TM
31