Intended Use - Earlex WS125 Manual De Instrucciones

Ocultar thumbs Ver también para WS125:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 40
EN
the unit by its handle.
NEVER
pull on the steam hose or supply cord. Do not use if supply cord or any other part
is visibly damaged, particularly if unit has been known to have been dropped.
NEVER
submerge the unit in liquid. Every time the accessory is changed for filling /
refilling and emptying or when the steam unit is not in use (including work pauses), pull the
mains plug out of the socket-outlet.
NEVER
overfill the unit. Unplug the mains plug in the event of overfilling or a fault. Use
only WAGNER original spare parts and accessories!
CAUTION!
Danger of short-circuits! Cover socket-outlets and switches and do not
subject them to steam. When using an extension cable: max.10m long – the cord cross-
section must be at least 3 x 1 mm
gypsum bases and coated materials these can be impaired by heat or steam. Remedy: Use a
heat / steam shield made of cardboard or metal. The unit switches off automatically in case
of overheating. After approx.10 minutes, the unit switches itself back on automatically. The
steam time is approximately 70-80 minutes.
NEVER
leave a unit unattended if switch is on. Keep the unit away from children and
animals.
NEVER
let the container steam until it is completely empty.

Intended use

The Steam Wallpaper Stripper is solely suited to removing wallpaper.
To ensure long life of the steam wallpaper stripper, unplug and clean your unit
immediately and thoroughly after each use.
CAUTION! - Steam can loosen weak, cracked, porous or poorly bonded plaster. Check
a small area before starting work. Do not hold the steamplate in one position too long
and stop if plaster starts to break.
PROTECT YOUR HOME- To prevent marks from steam on carpets and soft furnishings it
is recommended the unit be place on a hard flat board. Ensure the unit will not slip or
tilt. Dust sheets and newspapers are not suitable.
Preparation
Gently score the areas to be stripped using a proprietary perforator
tool or the edge of a wall scraper in a criss-cross pattern.
12
. Avoid damage! When working in the vicinity of wood /
2
WS125 / WS77

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Ws77

Tabla de contenido