Publicidad
Idiomas disponibles
Idiomas disponibles
IMPORTANT! READ EACH STEP
IN THIS MANUAL BEFORE YOU
BEGIN THE ASSEMBLY.
TWO (2) ADU L TS ARE REQUIRED T O ASSEMBLE
THIS BASKETBALL DOUBLE SHOOTOUT
Tools Needed:
Wrenches T1 and T2 (Included with the Hardware Kit)
Philips Screwdriver
Adjustable Wrench or Socket Set is helpful but not required.
Make sure you understand the following tips before you begin to assemble your
basketball shootout.
1. This is an electrically operated product. It is intended for INDOOR use ONLY.
2. This product is not designed to be used in a garage or on a patio, sunlight may
effect the infrared sensors and the unit will not perform correctly.
3. Tighten hardware as instructed.
4. Do not over tighten hardware,as you could crush the tubing.
5. Some drawings or images in this manual may not look exactly like your product.
6.
To prevent damage to the electronics, do not place this unit any closer than six
inches from the wall.
RE A D A N D FOLL O W A L L ASSE M B L Y , OP E R A TIO N , A N D
S A FE T Y I N S T R U C TI O N S C A R E F U L L Y . A T L E A S T T W O
ADULTS ARE NEEDED TO PUT THIS BASKETBALL
All Rights Reserved
© 2013 Escalade S por t s
DOUBLE SHOOTOUT TOGETHER.
2
For Customer Service Call 1-888-996-2729
Publicidad
