Dmx Linking - Chauvet SlimPACK 56 LT Guía De Referencia Rápida

EN

DMX Linking

DMX Connection
Master/Slave
Connection
Mounting
Product
Mounting
Diagram
Programming
The SlimPAR™ 56 can work with a DMX controller when linked using a
regular DMX serial connection. If you are not familiar with DMX,
download the DMX Primer from www.chauvetlighting.com.
The SlimPAR™ 56 uses a regular DMX data connection for its DMX
personalities, 7-CH and 3-CH.
Download the SlimPAR™ 56 User Manual and refer to Setup to learn how
to connect this product for DMX operation, and Operation to learn in detail
how to configure this product for DMX operation.
The SlimPAR™ 56 uses the DMX data connection for its Master/Slave
mode.
Download the SlimPAR™ 56 User Manual and refer to Setup to learn how
to connect this product for Master/Slave operation, and Operation to learn in
detail how to configure this product for Master/Slave operation.
Before mounting this product, read the Safety Notes at the beginning of this
guide and in the product's User Manual. The mounting instructions are
provided in Setup in the User Manual.
Secondary Bracket
Bracket Adjustment Knob
For details on how to fully program these products, please refer to the
applicable product's User Manual.
Primary Bracket
5
SlimPACK™ 56 QRG