Introduction For Buttons On Remote Controller; On/Off Button; Mode Button - Quipon GRH085DA-K3NA2B Manual De Usuario

■ Introduction for buttons on remote controller

Note:
▪ This is a general use remote controlle , it could be used for the air conditioners with multifunction; For some function,
which the model doesn't have, if press the corresponding button on the remote controller that the unit will keep the
original running status.
▪ After putting through pow r, air conditioner will give out a sound and operation indicator „
can operate the air conditioner through the remote controller.
▪ At ON status, after each pressing button on remote controller, the signal icon „
Air conditioner will give out a sound,which indicates the signal has been sent to air conditioner.
▪ Under ff status, set temperature and clock icon will be displayed on the display of remote controller (If timer on, timer off
and light functions are set, the corre-sponding icons will be displayed on the display of remote controller at the same
time); Under on status, the display will show the corresponding set function icons.

1. ON/OFF button

Press this button, the unit will be turned on, press it once more, the unit will be turned off. When turning on or turning off the
unit, the Timer, Sleep function will be canceled, but the presetting time is still remained.

2. MODE button

Press this button, Auto, Cool, Dry, Fan, Heat mode can be selected circularly. Auto mode is default while power on. Under
Auto mode, the temperature will not be displayed; Under Heat mode, the initial value is 28°C(82°F); Under other modes, the
initial value is 25°C(77°F).
AUTO COOL DRY
(Only for cooling and heating unit. As for cooling only unit, it won't have any action when it receives the signal of heating operation.)
3. - button
Presetting temperature can be decreased. Press this button, the temperature can be set up, continuously press this button
and hold for two seconds, the relative contents can quickly change, until unhold this button and send the order that the℃(℃)
signal will be displayed all the time. The temperature adjustment is unavailable under the Auto mode, but the order can be
sent by if pressing this button.
4. + button
For presetting temperature increasing. Press this button, can set up the temperature, when unit is on. Continuously press
and hold this button for more than 2 seconds, the corresponding contents will be changed rapidly, until unpress the button
then send the information, °C(°F) is displlaying all along. In Auto mode, the temperature can not be set up, but operate this
button can send the signal. Centigrade setting range: 16-30; Fahrenheit scale setting range 61-86.
FAN HEAT
- 40 -
„ is ON (red indicator). You
„ on remote controller will flash once.