Introduction; Safety Notes - ADInstruments AD4234 Manual De Usuario

AD Instruments
_____________________________________________________________________

1. INTRODUCTION

This meter has been designed and tested according to
the IEC Publication 348, safety requirements for Electronic
Measuring Apparatus, EN 61010-1, EN 61326-1, EN 61557-1
EN 61557-5 and other safety standards.

2. SAFETY NOTES

• Read the following safety information carefully before attempting to operate
or service the detector.
• Use the meter only as specified in this manual. Otherwise, the protection
provided by the meter may be impaired.
• Rated environmental conditions:
(1) Indoor & outdoor use.
(2) Installation Category 1V 300V.
(3) Pollution Degree 2.
(4) Altitude up to 2000m.
(5) Relative Humidity 80% max.
(6) Ambient temperature 0—40°C.
• Observe the International Electrical Symbols listed below:
Detector is protected throughout by double insulation or reinforced insulation.
Warning Risk of electric shock.
Caution! Refer to this manual before using the detector.
Earth(ground) terminal.
C E Equipment complies with current EU directives.
©Copyright Abacanto Digital SA.
14
Manual de usuario AD4234