Signs And Symbols; Observe Safety Instructions - ANSMANN PL210R Manual De Instrucciones

normal operation of the following product:
The following text refers to the inspection lamp simply as the lamp or the product.
Read this manual carefully before using the lamp for the first time and proceed accordingly.
Keep these operating instructions for future use or for the reference of future users.
Failure to follow the operating instructions and safety instructions may result in
damage to the product and hazards (injuries) for the operator and other persons.
The operating instructions refer to applicable standards and regulations of the Euro-
pean Union. Please also adhere to the laws and guidelines specific to your country.

SIGNS AND SYMBOLS

Please take note of the following symbols and words used in the operating
instructions, on the product and on the packaging.
INFORMATION - Useful additional information about the product
CAUTION - The caution warns you of possible damage of all kinds
WARNING - Attention – Danger! May result in serious injury or death

OBSERVE SAFETY INSTRUCTIONS!

Avoid eye injuries - Never look directly into the beam of light or shine it into other
people's faces. If this occurs for too long, the blue light portion of the beam can
cause retinal damage. If the light beam shines into the eyes, close the eyes and
turn the head away from the light beam.
This lamp exceeds the conditions for risk-free use. The risk when using it depends
on how the user handles the lamp.
(1) This value indicates the factor by which the risk group limit value to the next
lowest group has been exceeded. The limit value is 1.
(2) Distance from eyes to the lamp at which the respective risk group is applicable.
Gefahrenwert der Exposition / Exposure Hazard Value (EHV)
Risc group
2
1
Free group
§ Information for the light, mains adapter and mains voltage on the socket must
match with the type plate.
§ Do not use the product if there is damage to the housing, plug, cable or mains
adapter. Contact your local authorised specialist or the service address of the
manufacturer.
10
RISC GROUP 2
Gefährdungsabstand / Hazard Distance (HD)
0m up to 0,63m
0,63m up to 6,30m
> 6,30m
Deutsch | English
Svenska | Italiano | Nederlands | Portuguese
| Français | Español
: 9.9
(1)
(2)