Getting Started; Cleaning And Care - Electrolux EEWA3300 Libro De Instrucciones

• The appliance and accessories become hot during operation. Use only
designated handles and knobs. Allow to cool down before cleaning or
storage.
• Do not immerse the appliance in water or any other liquid.
• Do not use or place the appliance on a hot surface or near source of heat.
• Warning: Avoid spillage on the connector.
• Attention: The heating element surface is subject to residual heat after use.
• The mains cable must not come into contact with any hot parts of the
appliance.
• This appliance is intended for domestic use only. The manufacturer cannot
accept any liability for possible damage caused by improper or incorrect
use.
• Attention: If the kettle is overfilled there is a risk that the boiling water may
spray out, which could scald or burn! Therefore never fill the kettle above the
maximum marking.
• Never operate appliance with open lid.
• Only use the kettle for heating water!
• The kettle can only be used with the stand provided.
• The mains cable or anything else must do not touch the power switch.
Failure to do so could result in the auto shut off function not to work correctly
and therefore in a risk of overheating or fire.
• While water boiling, avoid contacting with steam from the spout when water
is boiling or just after it has switched off. Do not be anxious to uncover the
lid.
This appliances is intended to be used in household and similar applications
such as:
- staff kitchen areas in shops, offices and others working environments;
- farm houses;
- by clients in hotels, motels and other residential type environments;
- bed and breakfast type environments.

GETTING STARTED

1. Before first use, wipe the inside and outside of the kettle with a damp cloth.
2. Place the base unit on a firm and flat surface. Plug the mains plug into a wall socket.
Redundant cord can be wound into the bottom of base unit.
3. Press the button to open the lid, pour water into the kettle. Make sure water level
is visible in the water level indicator, but not exceeding the Max. mark.
4. Close the lid and make sure it snaps in correctly. Otherwise the auto switch off function will not
work reliably. Place the kettle onto the base. Press down the ON/OFF switch; the indicator light will
illuminate and the kettle will start to heat up.
5. The automatic switch off function. When the water has boiled or the kettle is moved from the base, it
will switch off automatically. If you wish to stop the heating process before the water is boiling, simply
lift up the ON/OFF switch to the OFF position.

CLEANING AND CARE

6. Before cleaning, always unplug the appliance. Never rinse or immerse the kettle or base unit in water.
Just wipe with a damp cloth, using no abrasive detergents. Occasionally rinse out the kettle with clean
water.
www.electrolux.com
EEWA3300_Mattino_WaterKettle_Electrolux.indd 25
BG
CZ
DE
DK
EE
ES
FI
FR
GB
GR
HR
HU
IT
LT
LV
NL
NO
PL
PT
RO
RS
RU
SE
SI
SK
TR
UA
25
2015-04-30 13:15:33