TP-Link TL-WPA2220 V1 Guía De Instalación Rápida página 7

Internet
WAN
1. Connect the adapter to a LAN port of your router using an Ethernet cable.
2. Plug the powerline devices into the wall outlets near each other and on the same
electrical circuit.
3. Pair the powerline devices.
A . Press the Pair button on the powerline adapter for 1 second. The Power LED
blinking.
* If the Power LED does not blink, press it again.
B. Within 2 minutes, press the Pair button on the powerline extender for 1 second. The
Power LED
LAN
starts blinking. When the Powerline LED
Powerline
A
Adapter
is on and stable, it's done.
English
B
Extender
starts
5