the indicator will be illuminated. The appliance will begin working. The
brewing process can be interrupted by turning switch to the "O" position at
any time, and the indicator will be extinguished. The appliance will
continue brewing once turning the switch to "I" position.
6.
When finish brewing, you can take out carafe, pour and serve.
Note: Take care when pouring coffee; otherwise you may be hurt as the
temperature of coffee just finished is high. The coffee you get will be less
than the water you have poured in, as some water is absorbed by coffee
ground. As safety is concerned, you had better cover the lid of carafe
when pouring, that is good to keep warm too.
7.
After brewing, you can replace the carafe on keeping warm plate. Once
the coffee maker is energized, the coffee can be kept warm.
8.
Always turn the coffee maker off and unplug the power cord from the
electrical outlet when the coffee maker is not in use.
CLEANING AND MAINTENANCE
CAUTION: Be sure to unplug this appliance before cleaning. To protect against
electrical shock, do not immerse cord, plug or unit in water or liquid. After each use,
always make sure plug is first removed from wall outlet.
1.
Clean all detachable parts after each use in hot, sudsy water.
2.
Wipe the product's exterior surface with a soft, damp cloth to remove
stains.
3.
Water droplets may buildup in the area above the brew basket and drip
onto the product base during brewing. To control the dripping, wipe off the
area with a clean, dry cloth after each use of the product.
4.
Use a damp cloth to gently wipe the keeping warm plate. Never use
abrasive cleaner to clean it.
REMOVING MINERAL DEPOSITS
To keep your coffee maker operating efficiently, you should clean away the
mineral deposits left by the water regularly according to the water quality in
your area and the frequency using the appliance, the detail is as follows: fill the
carafe with one part of white vinegar and three parts of cold water, pour the
4