Installation Steps; Care And Cleaning - AVS Ventvisor® Instrucciones De Instalación

Installation Steps

Align visor to the previously cleaned surface. The lateral flange
attaches to the chrome or black trim. The front flange will attach on
top of the mirror base plate.
front flange
mirror base plate
3
Apply pressure along all flanges to ensure proper adhesion of tape.
5

Care and Cleaning

• Wash only with mild soap & dry with a clean cloth.
Congratulations!
You have purchased one of the many quality Auto Ventshade™ branded products offered by Lund International,
Inc. We take the utmost pride in our products and want you to enjoy years of satisfaction from your investment.
We have made every effort to ensure that your product is top quality in terms of fit, durability, finish and ease of
installation.
™ Auto Ventshade
NOTE: Actual application may vary slightly from illustrations.
Lund International
800-241-7219 • Visit us at lundinternational.com
© 2012 Lund International, Inc. All rights reserved.
, the Auto Ventshade logo and the AVS
TM TM
Gently press the exposed areas of tape against the surface and
verify position. With the visor in its final position, remove the
remaining tape liner by pulling on free ends.
chrome/
black trim
PRESS
visor
cross section of visor in place
4
4 Piece Set
6
Repeat Steps 1-6 for opposite side.
logo are trademarks of Lund International, Inc.
TM
Page 2 of 2
rubber
window
channel
The rear visor attaches with the same
preparation methods as the front visor.