VESS R2600 TASK LIST
•
Task 1: Unpacking the Vess R2600/ Vess J2600
•
Task 2: Mounting Vess R2600/ Vess J2600 in a Rack
•
Task 3: Installing Disk Drives
•
Task 4: Management Connections
•
Task 5: Setting Up Serial Cable Connections
•
Task 6: Connecting the Power
•
Task 7: Setting the IP Address
•
Task 8: Creating Logical Drives with WebPAM PROe
•
Contacting Technical Support
TASK 1: UNPACKING
Note
The Vess R2000 series and Vess J2600 can accommodate SAS and SATA (3Gbps/6Gbps) hard drives. SATA drives
require an additional adapter that is installed before shipping. Make sure you have the correct drive carriers for the
hard drives that will be installed. Talk to your vendor for more information. Also see pictures of the different drive
carriers in "Task 3: Installing Disk Drives".
VESS R2600 PACKING LIST
The Vess R2600 box contains the following items:
• Vess R2600 Unit (PTVR2K)
• Quick Start Guide printed
• RJ11-to-DB9 serial data cable
• Screws for disk drives (70 pieces for 16-bay)
VESS J2600 PACKING LIST
The Vess J2600 box contains the following items:
• Vess J2600 Unit (PTVJ2K)
• Quick Start Guide printed
• RJ11-to-DB9 serial data cable
• Screws for disk drives (70 pieces for 16-bay)
• Sliding rail assembly for rack mounting
VESS R2000 SERIES MODEL LINE-UP
Model
R2600fiD
R2600iD
R2600fiS
R2600iS
VESS J2000 SERIES MODEL LINE-UP
Model
J2600sD
J2600sS
Controller
Interface
Units
2
FC/iSCSI
2
iSCSI
1
FC/iSCSI
1
iSCSI
Controller
Interface
Units
2
1
• 1.5m (4.9 ft) Power cords (3 cords for 3 PSU installed,
4 cords for 4 PSU installed)
• CD with SNMP files, Product Manual and Quick Start
Guide in PDF format
• Sliding rail assembly for rack mounting
• 1.5m (4.9 ft) Power cords (3 cords for 3 PSU installed,
4 cords for 4 PSU installed)
• SAS cable (1 cable J2600sS/ 2 cables J2600sD)
• CD with SNMP files, Product Manual and Quick Start
Guide in PDF format
Number of
Drives
16
16
16
16
Number of
Drives
SAS
16
SAS
16
4
Power
Cooling
Supplies
Units
3
2
3
2
3
2
3
2
Power
Cooling
Supplies
Units
3
2
3
2