Introduction; Intended Purpose - Parkside POFA 12 A2 Manual Del Usuario

Content
Introduction ............................... 23
Intended purpose ....................... 23
General description .................... 24
Extent of the delivery ...................... 24
Overview ...................................... 24
Functional description ..................... 25
Technical data ............................ 25
Safety instructions ...................... 26
Symbols in the manual .................... 26
Symbols on the appliance ............... 26
General safety instructions for power
tools ............................................. 26
Safety notices for milling cutters ....... 29
Residual risks ................................. 30
Initial operation ......................... 31
Change collet chuck ....................... 31
Mounting the suction adapter .......... 31
Inserting/changing cutters ............... 32
Mounting the parallel stop ....................32
Adjust cutting depth ........................ 32
Inserting/removing the battery ......... 33
Checking the battery charge level .... 33

Introduction

Congratulations on the purchase of your
new device. With it, you have chosen a
high quality product.
During production, this equipment has been
checked for quality and subjected to a final
inspection. The functionality of your equip-
ment is therefore guaranteed.
The operating instructions constitute
part of this product. They contain
important information on safety, use
and disposal.
Before using the product, familiarise
yourself with all of the operating
and safety instructions. Use the
product only as described and for
Operation .................................. 33
Switching on and off ...................... 33
Practical tips .............................. 33
Milling .......................................... 33
Edge and profile cutting .................. 34
Milling with parallel stop ................. 34
Cleaning/maintenance ............... 35
Cleaning ....................................... 35
General maintenance ..................... 35
Storage ...................................... 35
Waste Disposal/environmental
protection .................................. 35
Spare parts/accessories ............. 36
Troubleshooting ......................... 37
Guarantee ................................. 38
Repair service ............................ 39
Service-Center ............................ 39
Importer .................................... 39
Translation of the original EC
declaration of conformity .......... 173
Exploded Drawing ................... 181
the applications specified.
Keep this manual safely and in the
event that the product is passed on,
hand over all documents to the third
party.

Intended purpose

The device can be used for cutting not-
ches, edges, long holes and profiles on
workpiece surfaces made from wood,
plastics, light-weight materials.
Any other use that is not explicitly ap-
proved in these instructions may result in
damage to the equipment and represent a
serious danger to the user.
GB IE
23