Publicidad
2.12 Driver Installation Guide
To install the drivers to your system, please insert the support CD to your optical
drive fi rst. Then, the drivers compatible to your system can be auto-detected and
listed on the support CD driver page. Please follow the order from up to bottom side
to install those required drivers. Therefore, the drivers you install can work properly.
2.13 Installing Windows
TM
Vista
64-bit / XP / XP 64-bit With RAID Functions
If you want to install Windows
bit on your SATA3 HDDs with RAID functions, please refer to the document at the
following path in the Support CD for detailed procedures:
..\ RAID Installation Guide
2.14 Installing Windows
TM
Vista
64-bit / XP / XP 64-bit Without RAID Functions
If you want to install Windows
OS on your SATA3 HDDs without RAID functions, please follow below procedures
according to the OS you install.
2.14.1 Installing Windows
Functions
If you want to install Windows
functions, please follow below steps.
Using SATA3 HDDs without NCQ and Hot Plug functions (IDE mode)
STEP 1: Set up UEFI.
A.Enter UEFI SETUP UTILITY
B.Set the option "SATA Mode" to [IDE]. (For SATA3_1 to SATA3_6 ports.)
Set the option "Marvell SATA3 Operation Mode" to [IDE]. (For SATA3_7 and
SATA3_8 ports.)
STEP 2: Install Windows
38
®
7 / 7 64-bit / Vista
®
7 / 7 64-bit / Vista
®
7 / 7 64-bit / Vista
®
7 / 7 64-bit / Vista
®
XP / XP 64-bit Without RAID
®
XP / XP 64-bit on your SATA3 HDDs without RAID
Advanced screen
®
XP / XP 64-bit OS on your system.
ASRock 990FX Extreme4 Motherboard
TM
/
TM
TM
/ Vista
64-bit / XP / XP 64-
TM
/
TM
TM
/ Vista
64-bit / XP / XP 64-bit
Storage Confi guration.
Publicidad
