Hillrom Allen A-71101 Manual Del Usuario página 60

Specifications
Recommended separation distances between portable and mobile RF
communications equipment and the A-71100-XX/A-71101-XX
The A-71100-XX/A-71101-XX are intended for use in an electromagnetic environment in
which radiated RF disturbances are controlled. The customer or user of the A-71100-XX/A-
71101-XX can help prevent electromagnetic interference by maintaining a minimum distance
between portable and mobile RF communications equipment (transmitters) and the A-71100-
XX/A-71101-XX as recommended below, according to the maximum output power of the
communications equipment.
Rated maximum output
power of transmitter (W)
0.01
0.1
1
10
100
For transmitters rated at a maximum output power not listed above, the recommended
separation distance d in meters (m) can be estimated using the equation applicable to the
frequency of the transmitter, where P is the maximum output power rating of the transmitter
in watts (W) according to the transmitter manufacturer
Note 1: At 80 MHZ and 800 MHZ, the distance corresponding to the higher frequency range
should apply.
Note 2: These guidelines may not apply in all cases. Electromagnetic propagation is affected
by absorption and reflection from structures, objects and people.
60
Distance according to the frequency of the transmitter
150 kHz to
80 MHz
�� = ��. ����√��
0.12
0.37
1.17
3.69
11.67
Allen® Advance Table User Manual (D-720761 Ver D)
(m)
80 MHz to 800 MHz to
800 MHz 2.5 GHz
�� = ��. ����√�� �� = ��. ����√��
0.12 0.23
0.37 0.74
1.17 2.33
3.69 7.38
11.67 23.33