Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
INSTALL THE WIRING
LOCATE
ELECTRICAL
OUTLET
WITHIN THESE
AREAS.
(Verify location
will not interfere
with duct,
mounting
brackets,
and flue.)
1. GROUNDING INSTRUCTIONS
This appliance must be grounded. In the event of an electri-
cal short circuit, grounding reduces the risk of electric shock
by providing an escape wire for the electric current. This
appliance is equipped with a cord having a grounding wire
with a grounding plug. The plug must be plugged into an
outlet that is properly installed and grounded.
NOTE:
A recessed "clock" outlet is recommended.
2. Position the electrical outlet within the space covered
by the decorative flue and where it will not interfere
with the round duct. Make sure the outlet does not
interfere with the mounting bracket fastening area, ductwork,
or where the decorative flue touches the wall.
CEILING
DUCT
HOOD DISTANCE ABOVE 36" COOK TOP (SEE NOTE 1)
HEIGHT
METHOD
30"
MOUNTING BRACKET LOCATION ABOVE 36" HIGH COOK TOP
DUCTED
40-5/8" 41-5/8" 42-5/8" 43-5/8" 44-5/8"
8 FEET
NONDUCTED 40-5/8" 41-5/8"
---
DUCTED
9 FEET
NONDUCTED
---
---
DUCTED
10 FEET
NONDUCTED
---
NOTES:
1. Minimum hood distance above cooktop must not be less than 30".
Distances over 36" above the cooktop are at the installer's and user's discretion - providing
that ceiling height and flue length permit.
4"
22"
11"
31"
32"
33"
34"
---
---
---
---
42-5/8" 43-5/8" 44-5/8" 45-5/8" 46-5/8"
---
42-5/8" 43-5/8" 44-5/8" 45-5/8" 46-5/8"
---
42-5/8" 43-5/8" 44-5/8" 45-5/8" 46-5/8"
---
42-5/8" 43-5/8" 44-5/8" 45-5/8" 46-5/8"
INSTALL THE HOOD MOUNTING
BRACKET
MOUNTING BRACKET LOCATION
(ABOVE 36" HIGH COOKTOP)
40
⁄
" = bottom of hood 30" above cooktop
5
8
1. Construct wood wall framing that is flush with
interior surface of wall studs.
Make sure:
a) the framing is centered over installation
location.
b) the height of the framing will allow the
mounting bracket to be secured to the framing
within the dimensions shown.
2. After wall surface is finished, carefully center
and level the hood mounting bracket and secure
it to wall framing with (3) #8 x 1-1/2" mounting
screws. Tighten the screws completely.
NOTE: Do not use drywall anchors.
NOTE:
On 8-ft. ceilings
Hood distance above cooktop is:
Minimum 30", Maximum 34-3/4" (for ducted
35"
36"
discharge)
Minimum 30", Maximum 31" (for non-ducted
discharge)
---
---
On 9-ft. ceilings
Hood distance above cooktop is:
---
---
Minimum 32", Maximum 36" (for both ducted and
non-ducted discharge)
On 10-ft. ceilings
Hood distance above cooktop is:
Minimum 32", Maximum 36" (for both ducted and
non-ducted discharge).
NOTE: 10-ft. ceilings require 10-ft. Flue
Extension, Model FXN58SS for ducted or non-
ducted installations (purchase separately).
BW50 SERIES
WALL STUDS
FRAMING BEHIND
DRYWALL
L
C
7
⁄
"
7
8
3
⁄
"
15
1 6
Page 4
1
⁄
"
9
1 6
Publicidad
Tabla de contenido
