Pleasant Hearth 23-350-65 Instrucciones De Ensamblaje página 3

Carefully remove all pieces from carton and
Step 1
make sure that you have all parts listed (refer
to parts list on page 1).
If you are missing parts, please call GHP
customer service at 1-877-447-4768.
1. Set base (B) upright and insert 4 wood
dowels (CC) into pre-drilled holes in base (B).
Slip left side panel (D) over dowels on the left
side. Slip right side panel (E) over dowels on
right side. Make sure both panels are snug,
then secure with flat washers (BB) and bolts
(AA) through pre-drilled holes as illustrated.
Step 2
Tighten with screwdriver.
2. Slip front panel (C) down behind trim on side
panels until it rests on the bottom bracing.
Secure with flat washers (BB) and bolts (AA)
in pre-drilled holes as illustrated. Tighten with
screwdriver.
Step 3
3. Set top panel (A) onto mantle assembly.
Insert bolts (AA) through flat washers (BB)
and into pre-drilled holes as illustrated.
Tighten with screwdriver.
2