Homewerks 299650 Manual página 7

NEW CONSTRUCTION INSTALLATION INSTRUCTIONS
4.
Pull the wire through the hole and into the electrical box
(not included). Using wire connectors (not included),
secure 120V AC house wiring from the wall switch to the
fan as shown in the wiring diagram on the right. 14AWG is
the smallest conductor that shall be used for branch-circuit
wiring.
NOTE: Unit can be mounted in a ceiling or wall.
CAUTION: If the electrical wires do not match the
colors listed, you must determine what each house
wire represents before connecting. You may need to
consult an electrical contractor to determine safely.
Push the wires back through the hole.
5.
Install a circular 3 in. duct (not included) and secure it
with duct tape or clamps (neither included).
Finish ceiling work. The ceiling hole should be aligned
with the edge of the fan housing.
6.
Pinch the mounting springs on the grille and insert them
into the narrow rectangular slots inside the fan. Push the
grille up toward ceiling.
Turn on electricity at the breaker box after finishing
installation.
HomewerksWW.com
4
3 in. duct
5
Duct tape
or clamp
6
7
Ceiling