Olympus E-SYSTEM VF-2 Instrucciones página 6

INSTRUCTIONS
EN
Thank you for purchasing this Olympus product.
To ensure your safety, please read this
instruction manual before use, and keep it handy
for future reference.
Names of Parts (Figure 1 )
1 Electronic viewfinder mounting part
2 Connector
3 Connector cover
4 Display switching button (u)
5 Diopter adjustment ring
Attaching the Viewfinder (Figure 2 )
1 Turn off the camera.
2 Slide off the hot shoe cover.
3 Remove the connector cover, align the
viewfinder with the hot shoe, and slide it in
until it stops.
• To detach the viewfinder, turn off the
camera and follow the reverse procedure.
6
EN
Using the Viewfinder (Figure 3 )
1
Turn on the camera.
2
Turn the diopter adjustment ring to a position
where the image on the viewfinder can be
seen clearly.
3
Adjust the viewfinder to your preferred angle
(up to 90 degrees).
* The display switches between the LCD
monitor and viewfinder with every press of the
display switching button (u).
Attaching the Case (Figure 4 )
Warnings: Safety Precautions
• When carrying the camera, do not hold it by
the electronic viewfinder.
• You cannot use an external flash and the
electronic viewfinder at the same time.