Tripp-Lite B140-101 El Manual Del Propietario página 26

Extender/Splitter Daisy-Chain with Remote/
Repeater Installation
and B140-1A0 and B140-1A0-WP remote receivers only)
18
Repeat steps 8 through 17 for each additional RJ45 output port on the
local transmitter units.
19
Turn on the power to the DVI source. The orange RJ45 LEDs on the local
transmitter, remote/repeater and B140-1A0 illuminate to indicate a
signal is being received from the source. The orange LED on the
B140-1A0-WP-1 illuminates to indicate a signal is being received from
the source.
20
If necessary, use the Equalization control on the remote/repeater unit(s)
and remote receiver unit to adjust the video image.
Note: An improper Equalization setting can cause the monitor not to display a
picture at all. Try each Equalization setting until an acceptable picture is displayed.
17-08-508-933776.indb 26
(B140-004 extender/splitter,
26
11/27/2017 11:47:51 AM