LG SIGNATURE OLED77W9PLA Guía De Instalación Rápida página 19

1 Press the (Settings) on the remote to
access the settings menu. Point the
Settings] icon and select by pressing the
Wheel (OK) button on the remote.
( )
All Settings
2 Select the [Connection] → [Wired Connection
(Ethernet)] or [Wi-Fi Connection] → [Advanced
Wi-Fi Settings].
CONNECTION
Picture
Sound
TV Name
Programmes
Wired Connection (Ethernet)
Not Connected
Connection
Wi-Fi Connection
Not Connected
Device Connector
General
Mobile TV on
Safety Screen Share Settings
HDMI Device Settings
Accessibility
Follow the instructions below that correlate to your
network status.
Check the TV or the AP (Router).
When X appears next to TV:
Check the connection status of the TV, AP
1
(Router).
Power off and power on the TV, AP (Router).
2
If you are using a static IP, enter the IP directly.
3
Contact internet service provider or AP (Router)
4
company.
Troubleshooting Network Problems
( ) [All
WI-FI CONNECTION
Picture
Connection /
Sound
Programmes
Connection
Add a Hidden Wireless Network
General
Connect via WPS PBC
Safety Connect via WPS PIN
Advanced Wi-Fi Settings
Accessibility
Check the AP (Router) or consult your Internet
service provider.
When X appears next to Gateway:
Unplug the power cord of the AP (Router) and
1
try to connect after 5 seconds.
Initialize (Reset) the AP (Router).
2
Contact internet service provider or AP (Router)
3
company.
When X appears next to DNS:
Unplug the power cord of the AP (Router) and
1
try to connect after 5 seconds.
Initialize (Reset) the AP (Router).
2
Check that the MAC address of the TV/AP (Router)
3
is registered with your Internet service provider.
(The MAC address displayed on the right
pane of the network status window should be
registered with your Internet service provider.)
Check the AP (Router) manufacturer's website
4
to make sure your router has the latest firmware
version installed.