How to use
Charging
1
➊ If the voltage gets low during
operation, the power is
automatically turned off to protect
the battery.
You must then recharge the
battery.
Before beginning the recharge,
check that the hand held cleaner is
properly docked to the main body,
and then place it on the charging
stand.
12
Battery indicator
➋ The charging time may vary depending on the battery
condition.
When the minimum amount of charge is left, it takes about
4.5 hours to fully charge the battery. (Charging one battery)
• The battery fitted to the vacuum cleaner is charged first,
and then the battery attached to the charging stand is
charged.
• While the hand held cleaner is charging, the battery
indicator light blinks to show the charge amount.
• When the battery is fully charged, the hand held battery
status indicator stays on.
• While the battery on the charging stand is charging, the
single LED indicator on the charging stand will blink, and
when the battery is fully charged, the LED will remain on.
• If the vacuum is not used for a long period of time, it is
recommended to, remove the charging adaptor plug from
the wall socket.
• To get a full charge for the two discharged batteries at the
same time, it may take up to 9 hours.
Charging indicator
2