Descargar Imprimir esta página

Symbols - Stiga HT 48 Li Manual De Instrucciones

Ocultar thumbs Ver también para HT 48 Li:

Publicidad

• To avoid accidental starting, never carry
your unit with your finger on the trigger.
• Stay alert and pay attention to what
you are doing. Use common sense
when using this hedge trimmer.
• Wear heavy, long pants, substantial
footwear and well fitting gloves. Do not
wear short pants, sandals or go barefoot.
• Do not operate in poor lighting. Use the
unit only in daylight or good artificial light.
• Do not overreach or stand on unstable
support. Keep good footing and balance
at all times. Do not use on ladder.
• Do not force the hedge trimmer. It will do the
job better and with less likelihood of a risk of
injury at the rate for which it was designed.
• Release the trigger, allow the motor
to stop, and remove the battery pack
before performing maintenance,
repair, or making adjustments.
• This hedge trimmer is to be used for
cutting hedges, bushes, and shrubs only.
Do not use for any other purpose.
• Before starting the unit, make sure the cutting
blades will not come in contact with anything.
• If the machine strike or become entangled
with foreign objects, stop the unit
immediately, remove the battery pack
and check for damage. Do not operate
before repairing damage. Do not operate
the unit with loose or damaged parts.
• Watch what you are doing.
Use common sense.
• Maintain hedge trimmer with care. Keep
cutting edge sharp and clean for best
performance and to reduce the risk of
injury. Follow instructions for lubricating
and changing accessories. Keep handles
dry, clean, and free from oil and grease.
• Check damaged parts. Before further use
of the hedge trimmer, a guard or other part
that is damaged should be carefully checked
to determine that it will operate properly
and perform it's intended function. Check
for alignment of moving parts, binding of
moving parts, breakage of parts, mounting,
and any other condition that may affect
it's operation. A guard or other part that is
damaged should be properly repaired or
replaced by a Authorised Service Centre
unless indicated elsewhere in this manual.
• Risk of cut. Keep hands away from blades.
Do not attempt to remove cut material or
hold material to be cut when blades are
moving. Make sure battery pack is removed
and the trigger is released when clearing
jammed material from blades. Do not grasp
the exposed cutting blades or cutting edges
when picking up or holding the unit.
Blades continue to move
for a short time after unit is
turned off.
• Keep hands, face, and feet at a safe distance
from moving parts. Do not touch or try to stop
the cutting blades when they are moving.
• Always stop the motor when cutting
is delayed or when walking from
one cutting location to another.
• Keep unit clean of hedge clippings
and other materials. They may become
lodged in the cutting blades.
• Store the unit inside in a dry place, either
locked up or up high to prevent unauthorised
use or damage. Keep out of the reach
of children or untrained individuals.
• Replace blade cover when unit is not in use.
• Never douse or squirt the unit with water
or any other liquid. Keep handles dry,
clean and free from debris. Clean after
each use, see Storage instructions.
• Be sure to secure the unit while transporting.
• Keep these instructions. Refer to them
often and use them to instruct other
users. If you loan someone this unit,
also loan them these instructions.
SERVICE
• Service on unit must be performed
only by qualified repair personnel.
Service or maintenance performed by
unqualified personnel could result in a
risk of injury to the user, or damage to the
unit. It may also void your warranty.
• When servicing a unit, use only identical
replacement parts. Follow instruction in
the maintenace section of this manual. Use
of unauthorised parts or failure to follow
Maintenance Instructions may create a risk of
shock or serious injury to the user, or damage
to the unit. It may also void your warranty.
If any parts are missing, do not
operate unit until the missing parts are
replaced, Failure to do so could result
in possible serious personal injury.
SAVE THESE INSTRUCTIONS. REFER TO
THEM FREQUENTLY AND USE THEM TO
INSTRUCT OTHERS WHO MAY USE THIS
UNIT. IF YOU LOAN SOMEONE THIS UNIT,
LOAN THEM THESE INSTRUCTIONS ALSO

3. SYMBOLS

Some of the following symbols may be used on
this tool. Please study them and understand their
4

Publicidad

loading