STEINEL PROFESSIONAL IR Quattro KNX Manual De Instrucciones página 18

Reach Setting
(HF 360 KNX / DUAL HF KNX)
HF 360 KNX-mounting height 2.8 m
HF 360 KNX reach can be selected using the
remote control RC 6 (see Accessories) as well
as ETS Software/KNX BUS (refer to calibration
description, www.knx.steinel.de). 1 or 2 detec-
tion directions can be masked out for adjustment
to the room situation. An angle of coverage of
Electrical Installation / Automatic Mode
In selecting the wiring leads, it
is important to meet the wiring
regulations laid down in
VDE 08 29 (DIN EN 5000 90) -
(see Safety warnings on page 14).
DUAL HF KNX-mounting height 2.8 m
360° provides a max. reach of 8 m. The DUAL
HF KNX sensor has 2 special HF sensors that
detect movement from the ceiling in both direc-
tions. Reach is electronically selectable in ei-
ther direction.
- 17 -